Table of Contents
Advertisement
14. Removing Safety wire ass'y
14-1. Remove Screws 107 (x2) on Base 2 , then remove Safety wire ass'y 154 .
154
This is the disassembling procedure after the disassembling of:
1. Removing Base unit: Page 9
Refer to Step 15-2 on page 37 for reassembling.
15. Disassembling Lock mechanism part
15-1. Remove Screw 109 (x1), then remove Stopper plate 16 .
Note: Be carefull with Stopper 19 and Spring A 57 jumping out.
This is the disassembling procedure after the disassembling of:
1. Removing Base unit: Page 9
Refer to Step 15-1 through 15-2 on page 37 for reassembling.
2
Base
Safety wire ass'y
107
Screws
3x8 mm
(x2)
16
Stopper plate
57
Spring A
19
Stopper
Figure of Step 15-1
Figure of Step 14-1
–20–
109
Screw
3x6 mm (x1)
Advertisement
Table of Contents
