Table of Contents
Advertisement
INSTALLING AND REMOVING A CARD
CAUTION
Always turn off the camera and confirm the indicator lamp is not lit before
changing the card, otherwise the card may be damaged, and data lost.
An SD (Secure Digital) Memory card or Multi Media Card must be inserted for
the camera to operate. If a card has not been inserted, a no-card warning
appears on the LCD monitor; the shutter can still be released, but no image is
captured.
1
Slide the card chamber door toward the back of the camera to
release the safety catch. Open the door.
1
3
2
Insert the card all the way into the card slot and then release. The
card should catch in the slot.
Insert the card so the face is toward the back of the camera. Always push
the card in straight, never at an angle. Never force the card. If the card
does not fit, check that it is orientated correctly. If a Multi Media Card is
inserted incorrectly, it will lock, but the card chamber door will not close.
3
Close the card-chamber door and slide it toward the camera to
engage the safety catch.
4
To eject a card, press the card into the slot and release. The card can
now be pulled out.
2
To eject the card...
1 Open
2 Push in,
then pull
out
32
English
Advertisement
Table of Contents
