Table of Contents
Advertisement
6. Installing Camera cover
6-1.
Put Camera cover 5 between the unit reassembled in Step 5-4 and Camera base 11 , and tighten Screws 107 (x4) to
install.
Torque: 75.6 cN•m (7.7 kgf•cm)
Apply Screw lock after tightening screws.
Note1: Make sure of the direction to install.
5
Camera cover
11
Camera base
308
Screw lock
(x4)
107
Screws (x4)
3x8 mm
Figure of Step 6-1
7. Installing Frame B
7-1.
Install Frame B 10 to the unit reassembled in Step 6-1, then tighten Screws 102 (x4).
Note1: Keep Frame B 10 pressing towards the direction of the arrow to secure with the screws.
Torque: 43.2 cN•m (4.4 kgf•cm)
Apply Screw lock after tightening screws.
308
Screw lock
(x2)
102
Screws (x2)
2.6x4 mm
107
10
Frame B
Keep pressing towards
the direction of the arrow
to secure with the screws.
Figure of Step 7-1
The unit reassembled
in Step 5-4
*Make sure of the direction
to install.
2
Caution for Step 6-1
–27–
1
*Make sure of the position
of the pins.
The unit reassembled in Step 6-1
Advertisement
Table of Contents
