Reset The Telephony Gateway To Factory Defaults - Arris Touchstone TG3442 User Manual

5. Cable: Connector for the coaxial cable.
6. Power: Connector for the power cord.

Reset the Telephony Gateway to factory defaults

To reset the Telephony Gateway to factory defaults, press and hold the reset button on the
back of the Telephony Gateway for more than 15 seconds. This restores the configuration
parameters to the factory defaults. You may need to do this if a misconfiguration has locked
out all access.
Touchstone TG3442 Telephony Gateway User Guide STANDARD Revision 1.0
Chapter 5: Operate the Telephony Gateway
43