X8 Rental Truss Setup Accessories - Barco X8 Installation Manual

5.2

X8 rental truss setup accessories

Truss setup accessories
X8 truss beams are required to set up the X8 rental display in a hanging configuration. Barco offers two sizes of X8 truss beams,
namely the "X8 single truss beam" and the "X8 dual truss beam". The single truss beam covers a width of one X8 tile and the dual
truss beam covers two tiles. The single truss beam has one hoist point and the dual truss beam has two hoist points to lift up the
display.
1
Image 5-2
1 X8 single truss beam.
2 X8 dual truss beam.
W
ARNING
can maximum lift 1080 kg. This weight corresponds with a maximum display height of 13 X8 rental tiles. Do
not put any additional weight on the truss beam and use the truss beams only in conjunction with Barco's X8
rental tiles
W
ARNING
safety cable has to be placed through the inner frame of the truss. Secure each truss with an independent
safety cable.
R5905160 X8 RENTAL DISPLAY 25/02/2013
:
Maximum weight limit (safe working load) of the single truss beam is 540 kg, the dual truss beam
:
Always secure all truss beams of a hanging X8 rental display with the truss installation. The
5. X8 rental peripherals and accessories
2
25