VarioCooking Center WHITEFICIENCY Series Original Technical Instructions page 79

SD card
SD card or Main Board A2 exchange procedure
Exchange of the Main Board A2 and the
SD card. Both have already been used.
A. Put the old SD card in the Main Board A2
B. Fit the new A2 card in the unit with the power off.
C. When powering
appears because the Main Board and the
SD card are both already containing data.
The unit
whether to
the SD card to the main board A2
or to copy
main board
D. You have to confirm your selection twice with
a long press on the key.
E. Wait for the main menu to appear.
The allocation and calibration of the heating
zones is now mandatory!
It is advisable to remove the USB stick
from the unit with the power off!
Line Units
VCCM All
VCCWE
on, a special
prompts the
copy the data
the data from
A2 to the SD
Serial number (starting from)
ExxVH1009xxxxxxx
Exchange of the Main Board A2
card and the SD card. Both are new.
A. In this case please get the following
information
menu
customer service desk:
●The unit's serial number.
user:
●The options present (hot water, hob, etc.).
B. The unit will need to be reconfigured
from
via
accessible in service mode.
See the 'Service Mode' module for more
details.
the
card
The allocation and calibration of the heating
zones is now mandatory!
It is advisable to remove the USB stick
from the unit with the power off!
together then
the configuration
Sw Revision
01-00-08
v03 • July-2016 • Hen
VI.15
Control Module
contact our
module