Description of the Service Mode
Calibration
Calibration: Description
Fig. 2 Calibration of all the thermocouples by
comparison of the temperatures measured with
the theoretical boiling temperatures.
You will find a detailed description of this
function in the chapter Heating > Calibration.
The process is automated and must not be
interrupted.
Attention! The unit's installation altitude
must be correctly set before you calibrate it! If
you do not know or are unsure of this, please
do not calibrate the unit! This has already
been done at the factory!
Line
Units
VCCM
All
VCCWE
Serial number (starting from)
ExxXH1009xxxxxxx
2
Sw
01-00-08
IV.17
Service Mode Module
Revision
v03 • July-2016 • Hen