VarioCooking Center WHITEFICIENCY Series Original Technical Instructions page 40

Description of the Service Mode
Configuration
Description
Attention! This function must only be
used with the agreement of the manufacturer or
his legal representative.
The configuration tool, as the name suggests, is
for reconfiguring the unit. This may be required
following:
●The simultaneous exchange of the SD card and
the A2 Main Board.
●The addition of options like a ceramic hob,
energy enhancer, frying mode, etc.
After configuration the unit must be
restarted and where appropriate be subject to
allocation and calibration.
Procedure
A. Get in touch with the manufacturer or his
legal representative making sure you have
the following information:
●The unit key. (Fig.1)
●The unit's serial number.
●The list of current or added options.
B. You will be given a new configuration
key. To enter it into the unit press
the configuration key zone.
A new screen appears with a suitable keyboard
(Fig. 2). Unused characters are not displayed!
Enter the key you were given. Don't
forget the hyphens between the blocks.
Confirm with the green tick!
Line Units
VCCM All
VCCWE
Serial number (starting from)
ExxXH1009xxxxxxx
1
2
Sw
01-00-08
IV.18
Service Mode Module
Revision
v03 • July-2016 • Hen