File Access Control Category - Dalsa Linea Color CL User Manual

File Access Control Category

The File Access control in CamExpert allows the user to quickly upload various data files to
the connected camera. The supported data files are for camera firmware updates, Flat Field
coefficients, LUT data tables, and a custom image for use as an internal test pattern.
Features listed in the description table but tagged as Invisible are usually for Teledyne
DALSA or third party software usage—not typically needed by end user applications.
File Access Control Feature Descriptions
Display Name
File Selector
FPGA Code
Micro Code
CCI
XML
User Set
Factory FlatField
coefficients
Appendix A: GenICam Commands 
Feature
FileSelector
Firmware1
Description
Selects the file to access. The file types which are
accessible are device-dependent.
Upload new FPGA to the camera which will execute
on the next camera reboot cycle.
Upload new micro codeto the camera which will
execute on the next camera reboot cycle.
Upload new CCI to the camera which will execute
on the next camera reboot cycle.
Upload new XML to the camera which will execute
on the next camera reboot cycle.
Use UserSetSelector to specify which user set to
access.
Use UserSetSelector to specify which user flatfield
to access.
View
1.00
Beginner
DFNC
73