Camera Direction Control
Found in the I / O Control > Direction Control set of features.
Direction Control
Parameter
Sensor Scan Direction
Scan Direction
Pixel Readout Direction (Mirroring Mode)
Set the tap readout from left to right or from right to left. This feature is especially useful if
you want to mount the camera ―upside down.‖
Image Format Control
Parameter
ReverseX
Resetting the Camera
The feature Camera Reset, part of the Transport Layer set, resets the camera. The
camera resets with the default settings, including a baud rate of 9600.
Camera Information
Parameter
Camera Reset
46
Description
This command lets you select the Internal or external
direction control. Use this feature to accommodate object
direction change on a web and to mount the camera "upside
down."
Read the current direction.
Description
Off: All pixels are read out from left to right.
On: All pixels are read out from right to left.
Description
Resets the camera and puts in the default settings, including a 9600 baud rate.
4. Camera Operation