Dalsa Linea Color CL User Manual page 81

Description Upload file to camera using Xmodem protocol (HyperTerminal)
User set, PRNU, FPN, and color correction matrix are saved in the currently active set
Location to save color correction matrix is specified with CMS command
Notes Enter ―FCS <#>‖ command from HyperTerminal
Click on ―Transfer‖
Browse and find file
Select ―Xmodem‖ protocol
Click ―Send‖
When it indicates that it is done click ―Close‖
Upload all files and then reset camera
Full Name Flatfield Mode
Mnemonic FFM
Argument(s) Mode
Description Set flat field mode
Notes
Full Name Set Flatfield Scan Direction Reverse Set
Mnemonic FRS
Argument(s) User Set Number
Description Set scan direction controlled reverse set
Notes
Full Name Display Camera Configuration
Mnemonic GCP
Argument(s)
Description Display current value of camera configuration parameters
USER>gcp
Notes
Model
Microcode
CCI
FPGA
Serial #
BiST:
DefaultSet
Ext Trig
Line Rate
Meas L.R.
Max L.R.
Exp. Mode
Exp. Time
Appendix B: ASCII Commands 
Microcode
CCI
XML
User FPN
Output LUT
Color correction matrix
Disable use of user FPN and PRNU flat field correction
coefficients
Enable use of user FPN and PRNU flat field correction
coefficients
Reset user FPN coefficients to zero and user PRNU
coefficients to one
Scan direction controlled user set loading
1 to 8
LA_CC_08k05B_00_R
03-081-20382-02
03-110-20379-02
03-056-20562-02
19620110
Good
0
Off
6750 [Hz]
6750 [Hz]
13254 [Hz]
Timed
74074 [ns]
81