Step 2: Connect Data, Trigger, and Power Cables
Note: the use of cables types and lengths other than those specified may result in increased
emission or decreased immunity and performance of the camera.
WARNING! Grounding Instructions
!
Static electricity can damage electronic components. It's critical that you
discharge any static electrical charge by touching a grounded surface, such as the
metal computer chassis, before handling the camera hardware.
Data Connector: Camera Link
The camera uses two Camera Link SDR-26 cables transmitting the Camera Link Base,
Medium, Deca configuration. The figure below shows the SDR-26 Camera Link Connector
and the tables that follow list the Camera Link Base, Medium, and Deca configurations.
For detailed information on Camera Link please refer to the Camera Link Road Map available
from the
Knowledge Center
Software and Hardware Setup
Figure 7: Input and Output, trigger, and Power Connectors
on the Teledyne DALSA Web site.
17