Part Numbers and Software Requirements
This manual covers the Linea Color camera models summarized below. New models are
added to this manual as they are released by Teledyne DALSA.
Camera
Resolution
Linea 4k CL
4096 x 2
Linea 8k CL
8192 x 2
Software
Camera firmware
GenICam™ support (XML camera description file)
Sapera LT, including CamExpert GUI application and GenICam for Camera
Link imaging driver
Camera Performance Specifications
Specifications
Imager Format
Resolution
Pixel Size
Full Well Capacity
Line Rate
Exposure Time
Bit Depth
Connectors and Mechanicals
Control & Data Interface
Power Connector
Power Supply
Power Dissipation
Size
Mass
Operating Temp
Optical Interface
Lens Mount
Sensor to Camera Front Distance
Sensor Alignment (aligned to sides of camera)
The Linea Color Camera
Pixel size
Max. Line Rate
48 kHz
7.04 µm x 7.04 µm
48 kHz
7.04 µm x 7.04 µm
Performance
CMOS bilinear color line scan
4096 x 2 pixel lines: 4096 x 1 pixel line Green, and 4096 x 1 pixel line
alternating Red-Blue (4K)
8192 x 2 pixel lines: 8192 x 1 pixel line Green, and 8192 x 1 pixel line
alternating Red-Blue (8K)
7.04 µm x 7.04 µm
15K e- @ minimum gain of 1x
Minimum from 0 kHz maximum up to 48 KHz.
4 µs minimum to 3,000 µs maximum
8 bit, 12 bit
Base, Medium, or Deca Camera Link configurations—SDR-26
Hirose 6-pin circular
+ 12 V to + 24 V DC
8 W (4K), 11 W (8K)
62mm (W) x 62mm (H) x30.9mm (D) (4K)
76 mm (W) x 76 mm (H) x 36.7 mm (D) (8K)
<190g (4K)
< 360 g (8K)
0 °C to +65 °C, front plate temperature
M72 x 0.75, F-mount* (8K)
M42 x 1, F mount adapters available
12 mm
Lens Mount
Product Number
(threaded)
M42 x 1
LA-CC-04K05B-xx-R
M72 x 0.75
LA-CC-08K05B-xx-R
Product Number / Version Number
Embedded within camera
Embedded within camera
Version 7.30 or later
7