Dentsply Sirona
Operating Instructions CEREC Primemill
Tool
Bur 2.5 ZrO2 CS
Bur 1.0 CS
Bur 0.5 CS
Diamond 1.4 CS
Diamond 1.2 CS
Calibration pin
67 19 681 D3692
D3692.201.01.01.02 01.2020
5.4.2
Supplied tools
5.4.2.1
Tools
The following tools are available for grinding and milling. When
changing tools, ensure that permitted tool combinations are used (see
"Permitted tool combinations [→ 40]").
5.4.2.2
Calibration pins
The calibration pins are used when calibrating the tool sets (see
"Calibrating the unit [→ 37]").
5.4.2.3
Torque wrench
Use the proper torque wrench for inserting and changing tools and
calibration pins. When doing so, pay attention to the connection
geometry of the torque wrench.
REF
Usage
6713940
Milling of zirconium ox-
ide
(wet and dry)
6713932
All-purpose milling
(wet and dry)
6713924
All-purpose milling
(wet and dry)
6714088
Grinding
6714070
Grinding
Calibration
5 Installation and startup
Color
Connection geometry of
the force transmission
Yellow
Square
Black
Triangular
Black
White
White
Light blue
5.4 Commissioning
23