Filling The Water Tank; Dentsply Sirona - Dentsply Sirona CEREC Primemill Operating Instructions Manual

Dentsply Sirona

Operating Instructions CEREC Primemill
67 19 681 D3692
D3692.201.01.01.02 01.2020
5.4.7

Filling the water tank

NOTE
Using the tank cap opener
If you find the tank cap, tank drain or filter insert hard to open by
hand, use the tank cap opener (see "Using the tank cap opener").
NOTE
Coolant
Use distilled or demineralized water.
Water tank
A Tank
B Tank cap
C Filter insert
ü The water tank is drained, see "Removing water from the unit
[→ 57]".
1. Open the drawer of the unit.
2. Pull the water tank out of the unit's housing with the handle on the
bottom front side of the tank.
3. Turn the tank cap counter-clockwise and take it off.
5 Installation and startup
5.4 Commissioning
D Tank drain
E RFID chip
33