Note: This Instruction Manual, P/N 06-237214-002, is to be used by qualified and factory-trained
personnel, knowledgeable of NFPA standards and all local codes in effect.
This manual is intended to clearly and accurately reflect the BACnet
describes setup of the BACnet Interface Module for interfacing the ARIES NETLink
Automation Systems utilizing BACnet MS/TP or BACnet/IP protocols.
Note: It is recommended that an IT professional or Network Administrator be consulted during BACnet
Interface Module setup.
The manufacturer assumes no responsibility for the application of any systems other than those addressed
in this manual. The technical data contained herein is limited strictly for informational purposes only. The
manufacturer believes this data to be accurate, but it is published and presented without any guarantee or
warranty whatsoever. The manufacturer disclaims any liability for any use that may be made of the data
and information contained herein by any and all other parties.
Any questions concerning the information presented in this manual are to be addressed to the
manufacturer through the manufacturer's Authorized Distributor.
Any questions concerning the information presented in this manual should be addressed to:
Kidde-Fenwal, Inc.
400 Main Street
Ashland, MA 01721
Phone: (508) 881-2000
Toll Free: (800) 872-6527
Fax: (508) 881-8920
P/N 06-237214-002
FOREWORD
i
Interface Module. This publication
®
TM
control unit to Building
June 2012
Need help?
Do you have a question about the KiddeFire Systems ARIES NETLink BACnet and is the answer not in the manual?