Foreword - UTC Fire and Security FenwalNET 8000-ML Installation, Operation And Maintenance Manual

FOREWORD

Note: This Manual, P/N 06-237041-001, is to be used by qualified and factory-trained personnel, knowledgeable
of NFPA standards and any other applicable standards in effect.
This Manual is intended to provide guidance to qualified technical professionals for the installation, operation and
TM
maintenance of the FenwalNET 8000-ML Intelligent Fire Alarm-Suppression Control Unit.
Only qualified persons experienced and trained in the installation of this type of equipment should install and
configure the FenwalNET 8000-ML. They must be familiar and experienced with the wiring diagrams and
components, electrical installation, and familiar not only with NEC, relevant NFPA and local codes but also trained
and qualified by Kidde-Fenwal, Inc. Kidde-Fenwal, Inc. is a manufacturer of the components that make up the
FenwalNET 8000-ML system, and may not have the opportunity to visit the sites where the product is installed
or intended to be installed. It is the responsibility of the professional installer (described above) to properly install
and configure the systems. Under no circumstances will Kidde-Fenwal, Inc. be liable for improper installation or
configuration of the systems.
The technical data contained herein is provided for informational purposes only, and should not be used as a
substitute for professional judgment. Although, Kidde-Fenwal, Inc. believes this information to be true and correct,
it is published and presented without any guarantee or warranty whatsoever. Kidde-Fenwal, Inc. disclaims any
liability for any use of the data other than as set out in this manual, foreword included.
Any questions concerning the information presented in this manual should be addressed to:
Kidde-Fenwal, Inc.
400 Main Street
Ashland, MA 01721, USA
Phone: (508) 881-2000
Toll Free: (800) 872-6527
Technical Support: (866) 287-2531
Fax: (508) 881-8920
www.fenwalfire.com
P/N 06-237041-001 i February 2011