Pip/Pbp Menu - Eiki EK-812U Owner's Manual

DLP Projector — Owner's Manual
I
tem
4-Corner
Reset to Default

PIP/PBP Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OUTPUT and press
the Enter button to enter the OUTPUT menu. Press the arrow keys (pq) to select PIP/PBP and press
the Enter button to enter the PIP/PBP menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
I
tem
PIP/PBP Enable
Main Source
Sub Source
Swap
Size
Layout
Allow the image to be squeezed to fit an area defined by moving each of
the four corners' x and y position.
Reset the Image Warping setting to the factory defaults.
PICTURE
PIP/PBP Enable
Main Source
OUTPUT
Sub Source
Swap
SETUP Size
Layout
OPTION
Toggle between displaying two sources at once (Main and PIP/PBP
images) or one source only.
From the list of active inputs, select one to be used as the main image.
From the list of active inputs, select one to be used as the PIP/PBP.
Change the main image to PIP/PBP, and the PIP/PBP to main image.
Swapping is available only when PIP/PBP is enabled.
Select the PIP/PBP size. Available options: Small, Medium, or Large.
Set the location of the PIP/PBP image on the screen.
D
escrIptIon
A
B
B
A
PIP / PBP
D
escrIptIon
36
— —
A
B
B
A
On
VGA
VGA
Large
PBP, Main Left