Ption M Enu - Eiki EK-812U Owner's Manual

DLP Projector — Owner's Manual
I
tem
Projector Address
IR Control
Communications menu
Note:
• (*)Change the setting ON / OFF depending on the device, if IR remote control of the projector does
not work.
Option Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press
the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
I
tem
Auto Source
High Altitude
Test Pattern
Background Color
Set the projector address. The projector will respond to IR remotes set either
at the same address as the projector or to IR remotes set to address 0.
Front:
Top
HDBaseT(*)
PICTURE
Auto Source
High Altitude
OUTPUT
Test Pattern
Background Color
Hot-Key settings
SETUP
Power Settings
Light Source Settings
OPTION
Information
Select "On" to allow the projector to search for other signals if the current
input signal is lost. When the setting is disabled, the projector will only
search current input connection.
Set high altitude mode On/Off. When On, the fan will operate at high speed
to ensure sufficient air flow for high altitudes.
Choose the desired internal test pattern to display. Press the Pattern button
to display next test pattern. Available options: Green Grid, Magenta Grid,
White Grid, White, Black, Red, Green, Blue, Yellow, Magenta, and Cyan.
Select Off to disable the function.
Use this feature to display a Logo, Blue, Black or White screen when no
signal is available.
D
escrIptIon
ON: Enable the Front IR Sensor
OFF: Disable the Front IR Sensor
ON: Enable the Top IR Sensor
OFF: Disable the Top IR Sensor
ON: Enable control signal via HDBaseT device
OFF: Disable control signal via HDBaseT device
OPTION
D
escrIptIon
42
— —
On
Off
Off
Logo
Aspect Ratio