Table of Contents
Advertisement
¾ When the projector exhibits a distinct change in performance - this indicates a need for service.
• When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or injury to persons.
• Upon completion of any service or repairs to this projector, ask the service technician to perform routine
safety checks to determine that the projector is in safe operating condition.
Information for users in the European Union
This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a
domestic environment.
Warning:
Do not aim a laser pointer at the lens aperture, which may damage the DMD in the projector and cause
personal injury.
We are not responsible for the hurt and damage caused by the improper use of laser pointer even in
warranty period.
Air circulation
Vents in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect
it from overheating, these openings must not be blocked or covered.
Caution:
• Hot air is exhausted from the exhaust vent. When using or installing the projector, the following
precautions should be taken.
• Do not put any flammable objects, or spray can near the projector. Hot air is exhausted from the air
vents.
• Keep the exhaust vent at least 1m away from any objects.
• Do not touch a peripheral part of the exhaust vent, especially screws and metallic part. This area will
become hot while the projector is being used.
• Do not put anything on the projector. Objects put on the cabinet will not only get damaged but also
may cause fire hazard by heat.
• Cooling fans are provided to cool down the projector.
• The fan's running speed is changed according to the temperature inside the projector.
Air Intake Vent
vii
—
Exhaust Vent
—
Preface
Directive 2009/125/EC.
Advertisement
Table of Contents
