Picture Menu - Eiki EK-812U Owner's Manual

DLP Projector — Owner's Manual

Picture Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press
the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
I
tem
Display Mode
Save to User
Wall Color
Dynamic Range
Brightness
Contrast
Sharpness
Color
Tint
Phase
Horz Position
Vert Position
Auto Image
3D Display
HSG Adjustment
Advanced
PICTURE
Display Mode
Save to User
OUTPUT
Wall Color
Dynamic Range
Brightness
SETUP
Contrast
Sharpness
Color
OPTION
Optimize the projector for displaying images under certain conditions, such
as Presentation, Bright, Movie, HDR, sRGB, DICOM SIM., Blending, 2D
High Speed, User (user-definable preset), and 3D.
Save the current picture settings in user profile, including brightness,
contrast, color, tint, color space, HSG adjustment and so on.
Select a similar color to the wall color from the preset six colors, such as
Blackboard, Light Yellow, Light Green, Light Blue, Pink, and Gray. Select
Off to disable the function.
Configure the High Dynamic Range (HDR) setting and its effect when
displaying video from 4K Blu-ray players and streaming devices.
Adjust the intensity of the image.
Adjust the degree of difference between the lightest and darkest parts of
the picture and change the amount of black and white in the image.
Select the edge clarity of the image.
Adjust a video image from black and white to fully saturated color. The color
setting applies to video sources only.
Adjust the red-green color balance in the image of video images. The tint
setting applies to video sources only.
Analog signals only. Adjust pixel phase when the image still shows shimmer
or noise after pixel tracking is optimized. Pixel phase can adjust the phase
of the pixel-sampling clock relative to the incoming signal.
Move the image right or left within the area of available pixels.
Move the image up or down within the area of available pixels.
Force the projector to reacquire and lock to the input signal. This is useful
when signal quality is marginal.
Configure the 3D display settings. See "3D Display Menu" on page 31.
Configure the color management settings. See "HSG Adjustment Menu" on
page 32.
Configure the advanced image settings. See "Advanced Menu" on page 33.
PICTURE
D
escrIptIon
30
— —
Bright
Off
50
50
8
50