DLP Projector — Owner's Manual
I
tem
Auto Power Off (min.)
Sleep Timer (min.)
Light Source Settings Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press
the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select Light Source Settings
and press the Enter button to enter the Light Source Settings menu. Press the arrow keys (pq) to
select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu)
to select or adjust the desired settings and press the Enter button to confirm.
I
tem
Light Source Mode
Constant Power Settings
Total Projector Hours
Automatically turns the projector off after no signals are detected for
a preset number of minutes. If an active signal is received before the
projector powers down, the image will be displayed.
This item allows the projector to automatically power off after it has been on
for a specified amount of time.
PICTURE
Light Source Mode
Constant Power Settings
OUTPUT
Total Projector Hours
SETUP
OPTION
Select Constant Power, Constant Luminance, or Eco Mode. When in Eco
Mode, the projector will adjust to the lowest fan speed and switch the light
source power to the minimum setting.
Set the value of the light source power (in Watts).
Display the projection time.
D
escrIptIon
Light Source Settings
D
escrIptIon
44
—
—
Eco Mode
100
3