3D Display Menu - Eiki EK-812U Owner's Manual

3D Display Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press
the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select 3D Display and press
the Enter button to enter the 3D Display menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
PICTURE
OUTPUT
SETUP
OPTION
I
tem
3D Mode
3D Format
3D Invert
DLP Link
3D-2D
3D Sync Out
L/R Reference
Frame Delay
3D Mode
3D Format
3D Invert
DLP-LINK
3D-2D
3D Sync Out
L/R Reference
3D Frame Delay
Enable to display 3D content.
Set 3D format. Supports Auto (automatically detects format), Frame
Packing, Side by Side, Top and Bottom, and Frame Sequential.
Invert 3D sync signal for the application of using single projector.
Select 3D Sync source:
• On: 3D Sync type is DLP link.
• Off: 3D Sync source is from the 3D SYNC OUT port.
Set how the 3D content is displayed on the screen: 3D (display 3D signal),
left (L) (display the left frame of the 3D content), or right (R) (display the
right frame of the 3D content).
Transmit a 3D sync signal by the 3D sync output corrector to the emitter
(To Emitter) or to the next projector (To Next Projector) for 3D blending
purposes.
Set the source of the left or right reference, such as 1ST Frame (used for
single 3D projector) and Field GPIO (make the 3D output signal the same
for multiprojectors application).
Set the frame delay to correct asynchronous displaying image in 3D
blending.
31
—
DLP Projector — Owner's Manual
3D
To Emitter
Field GPIO
D
escrIptIon
—
On
Auto
Off
Off
3D
1