6.2 Install Options
X series (X2/X3/X3p/X7) supports replaceable input and output optional modules, user
can install or replace the optional module according to actual need. Take X3 for example,
the specific installation steps are as follows:
Install the Optional Module
1. Unscrew the 2 captive screws in input modules block, and pull out the input module
block, as shown in figure:
Captive Screw
2. Install the input module:
For the whole PCB input module with DVI or HDMI interface, fix the input module on the
plate with 2 M3*4 flat screws, also need to install the 2G Micro SD card.
X3p
User Manual
68