Table of Contents
Advertisement
3.2.5 Layer Management
Layer Management is designed to manage the layer of each monitor.
Click this icon to
enter the interface:
Display Area
Here is to show all the Display Area set in previous step System Management. Click
to
cancel or use the corresponding Display Area.
Signal
To show the signal list of 16 inputs. Drag source from signal list to monitor
Click pencil icon
after the signal to change the signal name if needed.
Numbers on Monitor
Numbers on monitor is to show how many layers at present allowed to put in the monitor .
Each neighboring monitor (1 and 2, 3 and 4) allows to put 4 layers, if there is no neighboring
monitor in the display area, the single monitor can contain 4 layers. For example in one display
area, there are monitor 1 and monitor 3, monitor 1 can contain 4 layer and so does monitor 3.
Please see the following example to understand the layers number on each monitor.
X3p
User Manual
45
Advertisement
Table of Contents
