RGBlink X3p User Manual page 59

XPOSE do operation on one device, same operation synchronized to other devices. For example,
there are two devices linked to the same network, one with IP IP192.168.0.112 SN 0027, the
other 192.168.0.129 SN 3344 as followed:
If users need to back up operation from current running device 3344 to 0027, slave unit shall be
used. First fill in the quantity of to be linked devices, click Set Numbers,
Index, Device IP and State will come up.
Fill in the blank with the IP address of the other device, e.g 0027,IP192.168.0.112 and click ON
, the red dot behind turns to green indicating that the device has been connected
Click OFF , the connection is cut off.
X3p User Manual
58