Table of Contents
Advertisement
Input Setting
1. Click any input port in purple area, the board where the port locates is selected. Users can do
settings to the board now. A red rectangle
flashes around the chosen port when it is clicked.
2.1 When DVI input module is chosen, Property, DSK Setting,EDID Setting,LOGO,Source Merge
could be done.
2.1.1 Property
Input Port：Current port
Scale
X/Y：Vertical and horizontal position
Width/Height：Vertical and horizontal size
Crop：
Left:crop left
Top:crop top
Width:horizontal size after crop
Height:vertical size after crop
Display mode：Live or Freeze
Picture Adjustment
Mirror：ON or OFF
Alpha：transparency adjustment, range from 0~128.
Mini Delay mode:On or Off. Select this mode On the the input signal is directly sent to output
display, without refresh rate delay.
Saturation：slide to adjust
Hue：slide to adjust
Color Temperature
Red：Slide to adjust
Green：Slide to adjust
Blue：Slide to adjust
X3p
User Manual
28
Advertisement
Table of Contents
