RGBlink X3p User Manual page 52

Step1: click Bank 2 and open Display Area
Step 2: click the icon behind to cancel the display area of 2 and 3 and click to
confirm,
Step 3:TAKE or Cut
Keep|Swap
Under the Keep status, users need to select a bank and use Cut or Take to switch image from PST
to PGM.
Under Swap status, users select a bank, then use Take or Cut to swap this bank and the bank
before this one.
Bank Save and Load
Save Bank to Page
Select a bank,click Page,select Page X,the bank is saved in the page.
The page turns green then become grey, indicating the bank is saved in the page.
Load bank from Page
Click Load Page, pages with bank saved are green, select one from them and the selected one
X3p User Manual
51