Table of Contents
Advertisement
Display Area, not not single monitor, but the bar under is for single monitor.
Parameter under Edge Blending Mode
Parameter here is to set the RGB value of each output port of Rotation board but bar is still the
bar is still for single monitor.
Note: Edge Blending Mode and Rotation Mode only work under the circumstance that ARO
Rotation module is installed to X3p device.
Parameter here is to set the RGB value of each output port of Rotation board but bar is still the
bar is still for single monitor.
Adjust Display Area
Drag the boarder of the display area to move its place in the interface.
Click icon
to shrink,Click
to enlarge the proportion of display area on interface.
X3p
User Manual
44
Advertisement
Table of Contents
