Input And Output Settings - RGBlink X3p User Manual

3.2.3 Input and Output Settings

Connect the Device
After Topology Diagram is finished, users can move to next step, the exact setting on each input
and output board.
Click icon and enter the operation interface.
First, choose the device from All Devices for example X3p SN:0000
Then click icon behind X3p in Chosen Device,IP and SN of this device is shown on the left
top corner of the interface ,which indicates that the device is connected to the
computer and it can be operated by XPOSE 2.0 from now on.
X3p User Manual
23