RGBlink X3p User Manual page 25

Output Setting
1. Click any output port in blue area, the board where the port locates is selected. Users can do
settings to the board now.
A red rectangle flashes around the chosen port when it is clicked.
2.1 After 2K DVI or HDMI board is selected, users can do the following settings in the edit section
after clicking icon
2.1.1 Resolution Setting
Switch Mode: Slide to Manual or Auto, If Manual is selected, users can slide ON or OFF to Output
Switch
Output Switch: Slide to On or OFF after Manual Switch Mode is selected
Format Range: select ALL or Module；
When ALL is selected, 26 Standard resolution types available, from 1920x1080@60 to
7680x1080@60
Format Type: Standard or Customize
Choose Customize, width, Height, Refresh Rate have to be put in by users manually.
X3p User Manual
24