Ride Height; Wheel Alignmnet Parameters - Mahindra Genio DC BS-IV Maintenance Manual

Maintenance Manual
GENIO DC
(BS-III & BS-IV)
Ride height - Is the verticle distance between front camber bolt nut side end center to the ground
plane.
The ride height should be Unladen 346 ± 5 mm; Laden 281 ± 5 mm.
If ride height is not within limits then please check for the coil spring damage or any issue is the
rubber or mounting bolt area or weak shock absorber. Also confirm if the shock absorber
projection is as per the specification. Last parameter to be checked should be the rubber bushes of
the LCA and UCA.

Wheel alignmnet Parameters -

Description
Toe-in partial
Toe-in Total
Camber
Difference between LH & RH camber
Caster
Difference between LH & RH caster
King pin Inclination
Wheel turning angle- Inner (Max)
Wheel turning angle- Outer (Max)
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes
introduced by the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or
whole of the present document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the
Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution © 2011 Mahindra & Mahindra Ltd.
MAN-00
JULY 2011
Parameters
0 to 1 mm ( 0 to 13')
0 to 2 mm ( 0 to 26')
- 30' to + 10'
30'
1°45' to 3°45'
1°
10°30' to 12°30'
35˚ to 38˚
34˚ to 36˚
135
/Rev1
42