Water Sediment Drain - Fuel Filter - Mahindra Genio DC BS-IV Maintenance Manual

Maintenance Manual
GENIO DC
(BS-III & BS-IV)
705-MAT-0013 : 0.10 hrs.
WATER SEDIMENTS DRAIN - FUEL FILTER
Fuel Filter Assembly
Fuel Filter – Drain Water Sediments
Refer above illustrations –
1. Water in Fuel drain plug is fitted at the bottom of the fuel filter assembly.
2. Loosen Water in Fuel drain plug by rotating it in anticlockwise direction [2]
3. Allow the Water accumulated in the filter to drain out.
4. Hand tight the Water in Fuel Sensor in clockwise direction to refit it.
5. Check and ensure for no fuel leak after job completion; if any.
Water sediments to be drain from Fuel filter first at 5000kms, 10000kms, and

then at every 20000kms.
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes
introduced by the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or
whole of the present document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the
Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution © 2011 Mahindra & Mahindra Ltd.
Fuel Filter
Assembly
2
Fuel Filter water drain socket removal
135
MAN-00
JULY 2011
/Rev1
16