Apply 10 – 12 gms. in wheel end bearing. Apply grease 10 – 15 gms. in Bearing Carrier cavity.
Total 20 – 27 gms. per wheel end.
Rear Axle Shaft and components exploded view
Lock Nut
Dismantling –
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes
introduced by the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or
whole of the present document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the