Exhaust System - Check - Mahindra Genio DC BS-IV Maintenance Manual

Maintenance Manual
GENIO DC
(BS-III & BS-IV)
705-MAT-0039 : 0.10 hrs

EXHAUST SYSTEM - CHECK

A
GENIO (BS-III) – Exhaust System
B
GENIO (BS-IV) – Exhaust System
EXHAUST SYSTEM - CHECK
Refer above illustrations A & B for BS-III & BS-IV models respectively.
1. Check all the Exhaust mountings for exhaust pipe fouling, if any and correct fittings if
required.
2. Check all the Exhaust joints shown circled for leakage and correct fittings.
3. Check rubber hanger shown by arrow for crack and shift, replace it if required.
Park the vehicle in inspection pit / 2 post lift / 4 post lift.

If the activity is done on a 2 post lift, ensure that the LSPV spring is

disconnected before lifting the vehicle. After lowering, re-connect the LSPV
spring and ensure that the setting height is correct.
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes
introduced by the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or
whole of the present document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the
Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution © 2011 Mahindra & Mahindra Ltd.
135
MAN-00
JULY 2011
/Rev1
53