Coolant Level - Check - Mahindra Genio DC BS-IV Maintenance Manual

Maintenance Manual
GENIO DC
(BS-III & BS-IV)
705-MAT-0008 : 0.05 hrs.
COOLANT LEVEL – CHECK
A
MAX
MIN
1
Coolant
Level
Indication on
Reservoir
B

Coolant Level - Check

Refer illustrations shown.
1. Check the coolant level in the recovery tank [A] – it should be between MAX and MIN
marks. If below MIN, top it up with Maximile Coolant.
2. Check the coolant level when the engine is cold.
3. Check the coolant level in the radiator [A] and top up if found less. Use MAXIMILE
Coolant directly from the container to top up. Maximile Coolant is pre-mixed and
hence do not dilute it with water.
4. Check for evidence of leakage at Water pump hose [B], Oil cooler hose [C]. Radiator
top and bottom hoses and HVAC heater hoses. Check points are shown by arrow mark.
Never remove the radiator cap when the engine is hot.

Never mix MAXIMILE coolant with water. Maximile coolant is premixed.

Use Maximile ULTRA COOL.

Recommended to check coolant level at every service interval.

The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes
introduced by the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or
whole of the present document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the
Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution © 2011 Mahindra & Mahindra Ltd.
2
1
C
135
MAN-00
JULY 2011
/Rev1
11