Using Low Quality Fuel - Mahindra ALTURAS G4 2019 Owner's Manual

STARTING THE ENGINE AND DRIVING THE VEHICLE
• Do not stop the engine immediately after coming back from high
load driving (such as high speed driving or driving on long slope).
Let the engine run for approx. 1 minute at idle speed to cool it
down
• After changing the engine oil and oil filter, start the engine and
let it run for approx. 1 minute at idle speed (Avoid acceleration or
driving off the vehicle)
• Do not rev the engine at high speed without air cleaner element
when checking the engine
Turbocharger
The turbocharger consists of two turbo elements, a turbine and a
compressor, both of which are driven from the main Centre shaft.
The turbine rotates between 50,000 ~ 1,60,000 revolutions per
minute and uses the energy of the exhaust gas to drive the
compressor. The compressor, in turn, draws in fresh air which it
supplies to the cylinders in the form of compressed air.
4-30

4.13 Using low quality fuel

The fuel system of the common rail direct injection engine is
precisely machined component. Using low quality fuel could result in
a serious damage to the engine due to the water, impurities or
suspended particles in fuel. Power loss, engine idling problem,
engine stall, difficulty with starting the engine in cold weather as well
as damage to the engine and the fuel system, due to the naturally
produced suspended particles. If any product in which the biodiesel
fuel exceeds the total amount of fuel is used or the aftermarket
biodiesel fuel is added to the regular fuel, it can lead to malfunctions
in the vehicle and this is not covered by warranty.
© Copyright Mahindra and Mahindra Ltd. 092018