Mounting The Module Temperature Sensor - SMA SUNNY SENSORBOX Installation Manual

Mounting the Device
7. Press the RS485-Power Injector to the wall.
8. Slide the RS485-Power Injector to the left.
☑ You have successfully mounted the RS485-Power
Injector on the wall.
4.4 Mounting the Module Temperature Sensor
Mounting accessories provided
A 1 PT100 module temperature sensor with 8.2 ft. connection cable
B 1 Thermally conductive adhesive (protective gloves, hardener and binder) with
instructions and packaging
C 2 Adhesive tape strips
The module temperature sensor is also separately available, see section 13 "Accessories" (page 59).
CAUTION!
Risk of chemical burns due to contact with thermally conductive adhesive.
Chemical burns of skin, mucous membranes and eyes.
• Follow the safety precautions and instruction of thermally conductive adhesive
manufacturer.
24 Sensorbox-IUS084413
SMA Solar Technology AG
Installation Guide