Table of Contents
Advertisement
DLP Projector — Owner's Manual
3D Menu
Press the [Menu] button to open the OSD menu. Press the [p]/[q] button to select 3D and press the
[Enter] button to enter the 3D menu. Press the [p]/[q] button to select the menu option and press the
[Enter] button to enter its submenu. Press the [p]/[q]/[t]/[u] button to select or adjust the desired
settings and press the [Enter] button to confirm.
I
tem
3D
DLP Link
3D Format
3D Sync Invert
3D Sync Out
Frame Delay
L/R Reference
3D
3D
DLP Link
3D Format
3D Sync Invert
3D Sync Out
Frame Delay
L/R Reference
Enable the 3D content detection.
•
Auto: Automatically detect the 2D or 3D mode.
•
On: Enable the 3D mode.
Enable/Disable the 3D DLP-Link function.
•
On: Enable 3D DLP- Link.
•
Off : Disable 3D DLP- Link.
Select the 3D format from Auto, Frame Packing, Side-by-Side, Top and
Bottom, and Frame Sequential.
Enable/Disable the 3D sync invert function.
•
Off: Use the default frame contents.
•
On: Invert left and right frame contents.
Transmit a 3D sync signal by the 3D sync output corrector to the emitter or
to the next projector for 3D blending purposes.
Correct asynchronous displaying of images under 3D blending.
Set the source of the left or right reference.
•
1st Frame: Used for single 3D projector.
•
Field GPIO: Used to make the first 3D output signal the same for multi-
projectors application.
36
—
Auto
To Emitter
Field GPIO
D
escrIptIon
—
ON
ON
OFF
Advertisement
Table of Contents
