Eiki EK-450U Owner's Manual page 71

6.
Click Use the following IP address and fill in the IP address and Subnet mask, then click OK.
7.
Press the [Menu] button on the projector.
8.
Select Setup → Network Control.
9.
After getting into Network Control, input the following:
• DHCP: Off
• IP Address: 10.10.10.10
• Subnet Mask: 255.255.255.0
• Default Gateway: 0.0.0.0
10.
Open a web browser (for example, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher).
In the Address bar, input the IP address: 10.10.10.10.
DLP Projector — Owner's Manual
55
— —