Adjusting The Projector Level; Adjusting The Zoom And Focus - Eiki EK-450U Owner's Manual

DLP Projector — Owner's Manual

Adjusting the Projector Level

Take note of the following when setting up the projector:
• The projector table or stand should be level and sturdy.
• Position the projector so that it is perpendicular to the screen.
• Ensure the cables are in a safe location. You could trip over them.
1.
To raise the level of the projector, lift the projector
2.
Locate the adjustable foot you wish to modify on the underside of the projector.
3.
Rotate the adjustable foot clockwise to raise the projector or counter-clockwise to lower it. Repeat with
the remaining feet as necessary

Adjusting the Zoom and Focus

• To adjust the image size, turn the zoom ring clockwise or counterclockwise to increase or decrease the
projected image size.
• To adjust the focus, turn the focus ring clockwise or counterclockwise until the image is sharp and
legible.
Note:
The projector will focus at distances (lens to wall) from 1.2m~16.5m (47.2~649.6 inches).
B
B
Zoom Ring
A
.
A
.
Focus Ring
14
— —