Setup Menu - Eiki EK-450U Owner's Manual

DLP Projector — Owner's Manual

Setup Menu

Press the [Menu] button to open the OSD menu. Press the [p]/[q] button to select Setup and press the
[Enter] button to enter the Setup menu. Press the [p]/[q] button to select the menu option and press
the [Enter] button to enter its submenu. Press the [p]/[q]/[t]/[u] button to select or adjust the desired
settings and press the [Enter] button to confirm.
Note:
Images shown are for illustration purpose only.
I
tem
Light Source Mode
Lens Function
Test Pattern
High Altitude
12V Trigger
Remote Settings
Display Mode Lock
Keypad Lock
HDBaseT Control
Setup
Light Source Mode
Lens Function
Test Pattern
High Altitude
12V Trigger
Remote Settings
Display Mode Lock
Keypad Lock
HDBaseT Control
Network Control
Select the light source mode:
Constant Power, Constant Luminance, ECO1, ECO2, and ECO3.
Configure the lens function related settings.
See "Lens Function" (page 40) for details.
This function is used to set the internal test signal:
Green grid, Magenta grid, White grid, White, Red, Green, Blue, Black, Gray
scale, Color bar, and Raster Gray.
When "On" is selected, the fans will spin faster. This feature is useful in
high altitude areas where the air is thin.
When "On" is selected, the 12 trigger Din will output the Active Pulse to
initial outside equipment.
Configure the remote control related settings.
See "Remote Settings" (page 41) for details.
Choose "Off" or "On" to lock or unlock adjusting the display mode settings.
Choose "Off" or "On" to lock or unlock the keypad function.
Choose "Off" or "On" to lock or unlock the RS232 settings.
38
—
Constant Power
Off
OFF
OFF
OFF
OFF
D
escrIptIon
—


