Table of Contents
Advertisement
DLP Projector — Owner's Manual
Options Menu
Press the [Menu] button to open the OSD menu. Press the [p]/[q] button to select Options and press the
[Enter] button to enter the Options menu. Press the [p]/[q] button to select the menu option and press
the [Enter] button to enter its submenu. Press the [p]/[q]/[t]/[u] button to select or adjust the desired
settings and press the [Enter] button to confirm.
Note:
Images shown are for illustration purpose only.
I
tem
Auto Source
Input Source
Language
Menu Settings
Direct Power On
Options
Auto Source
Input Source
Language
Menu Settings
Direct Power On
Signal Power On
Auto Power Off (min.)
Sleep Timer (min.)
Standby Power Mode
IR Control
PIN Protect
Change PIN
HDMI 1 EDID
Reset
Enable/Disable the auto source function.
•
Off: The projector will only search the current input connection.
•
On: Allow the projector to search for other signals if the current input
signal is lost.
Select the input source:
HDMI1, HDMI2, VGA, HDBaseT, and USB.
Select the multilingual OSD menu:
English, German, French, Italian, Spanish, Russian, Chinese Simplified,
Japanese, Korean, Portuguese, Indonesian, Dutch, and Arabic.
Set the menu location on the screen and configure the menu timer settings.
See "Menu Settings" (page 45) for details.
Choose "On" to activate Direct Power mode. The projector will
automatically power on when AC power is supplied, without pressing the
[
] button on the projector keypad or the [
42
—
English
Off
Off
Normal
Both
OFF
D
escrIptIon
On
Geometric
Correction
Menu
—
Exit
Source
Volume
OFF
Off
] button on the remote control.
PIP/PBP
F1
F2
AV Mute
ENTER
Re-Sync
F3
F3
D Zoom
Advertisement
Table of Contents
