Information Menu - Eiki EK-450U Owner's Manual

Information Menu

The information menu is used to confirm the current operating condition of the projector, and the detect
signal being projected and running state.
Press the [Menu] button to open the OSD menu. Press the [p]/[q] button to select Information and press
the [Enter] button to enter the Information menu. Press the [p]/[q] button to select the menu option and
press the [Enter] button to view the information.
I
tem
Display
Hardware
Main Source
Sub Source
Network
About
Control
Information
Display
Hardware
Main Source
Sub Source
Network
About
Control
Display the current display mode.
Display the hardware related settings including Standby Power Mode, High
Altitude, Total Projector Hours, and Temperature.
Display the main input source related settings including Source, Resolution,
Refresh Rate, and Color Format.
Display the sub input source related settings including Source, Resolution,
Refresh Rate, and Color Format.
Display the network related settings including LAN Status, IP Address,
Subnet Mask, Gateway, DNS, and MAC Address.
Display the projector information including Serial Number and FW Version.
Display the remote code information.
47
—
DLP Projector — Owner's Manual
D
escrIptIon
—