Picture Menu - Eiki EK-450U Owner's Manual

DLP Projector — Owner's Manual

Picture Menu

Press the [Menu] button to open the OSD menu. Press the [p]/[q] button to select Picture and press the
[Enter] button to enter the Picture menu. Press the [p]/[q] button to select the menu option and press
the [Enter] button to enter its submenu. Press the [p]/[q]/[t]/[u] button to select or adjust the desired
settings and press the [Enter] button to confirm.
Note:
Images shown are for illustration purpose only.
I
tem
Display Mode
Wall Color
Brightness
Contrast
Sharpness
Color
Tint
Picture
Display Mode
Wall Color
Brightness
Contrast
Sharpness
Color
Tint
Gamma
Color Settings
Dynamic Contrast
Optimize the projector for displaying images under certain conditions, such
as Standard, Presentation, Movie, DICOM, REC709, Real, Blending, and
Native.
Adjust the wall color:
White, Blackboard, Light Yellow, Light Green, Light Blue, Pink, and Gray.
Adjust the intensity of the image.
Adjust the degree of difference between the lightest and darkest parts of
the picture and change the amount of black and white in the image.
Select the edge clarity of the image.
Adjust a video image from black and white to fully saturated color.
The color setting applies to video sources only.
Adjust the red-green color balance in the image of video images.
The tint setting applies to video sources only.
28
— —
White

OFF
D
escrIptIon