3D Display Menu - Eiki EK-620UA Owner's Manual

DLP Projector — Owner's Manual

3D Display Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press
the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select 3D Display and press
the Enter button to enter the 3D Display menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
Item
3D Enable
3D Invert
DLP Link
PICTURE
3D Enable
3D Invert
DLP Link
OUTPUT
SETUP
OPTION
Set 3D format. Supports Mandatory 3D formats and frame sequential
3D@120Hz.
Invert 3D sync signal for the application of using single projector.
Select 3D Sync source:
• On: 3D Sync type is DLP link.
• Off: 3D Sync source is from the 3D Sync OUT port.
3D Display
Description
32
— —
Auto
Off
On