3D Menu - Eiki EK-623UW Owner's Manual

DLP Projector — Owner's Manual

3D Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select 3D and press the
Enter button to enter the 3D menu. Press the arrow keys (pq) to select the menu option and press the
Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the desired settings
and press the Menu button to exit.
Item
3D
3D Invert
3D Format
1080p@24
3D Sync Out
Frame Delay
L/R Reference
DLP Link
3D
3D Invert
3D Format
1080p@24
3D Sync Out
Frame Delay
L/R Reference
DLP Link
Select
Enable 3D content detection.
Invert 3D sync signal for the application of using single projector.
Set the 3D format. Supports mandatory 3D formats and frame sequential
3D@120Hz.
Set the 3D resolution 1080p@24 sequency.
Transmit a 3D sync signal by the 3D sync output corrector to the emitter or
to the next projector for 3D blending purposes.
Correct asynchronous displaying of images under 3D blending.
Source of the left or right reference.
• 1st Frame: This is used for single 3D projector.
• Field GPIO: Select Field GPIO to make the first 3D output signal the
same for multi-projectors application.
Select 3D Sync source:
• On: 3D Sync type is DLP link.
• Off: 3D Sync source is from the 3D Sync OUT port.
42
—
3D
Auto
Off
144Hz
To Emitter
50
1st Frame
Off
Enter Exit
Description
—