Eiki EK-450U Owner's Manual page 6

Safety Precautions
Caution:
• The projector must be grounded.
• Do not expose the projector to raindrops or high humidity to avoid a fire or electric shock.
• This projector produces intense light from the projection lens. Avoid staring directly into the lens,
otherwise eye damage could be caused. Be especially careful that children do not stare directly into the
beam.
• Place the projector in a proper position. Otherwise it may result in fire hazard.
• Leave an appropriate space from the top, sides, and back of the shell in order to ventilate and cool
down the projector. The figures below indicate the minimum distance to be left. It must be satisfied if the
projector is placed in sealed environment like a cabinet.
• Need to keep at least 15mm between the ceiling mount and bottom intake.
• Do not cover the vent of the projector. Poor radiation may shorten the service life or even cause
dangers.
• Remove the AC power plug if the projector is not to be used for a long time.
Caution:
• Do not set the projector in greasy, wet, or smoky conditions such as in a kitchen, to prevent a
malfunction or accident. If the projector comes in contact with oil or chemicals, it may become
deteriorated.
• Read and keep this manual for future reference.
• The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain
readily operable.
≥ 1m
(≥ 39.4")
—
≥ 1m
(≥ 39.4")
Bottom Intake
Ceiling Mount Plate
v
—
Preface