Table of Contents
Advertisement
DLP Projector — Owner's Manual
Picture Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select Picture and press
the Enter button to enter the Picture menu. Press the arrow keys (pq) to select the menu option and
press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Menu button to exit.
Item
Display Mode
Wall Color
Brightness
Contrast
Sharpness
Color
Tint
Gamma
White Peaking
Color Temperature
Color Wheel Speed
HSG Adjustment
Display Mode
Wall Color
Brightness
Contrast
Sharpness
Color
Tint
Gamma
White Peaking
Color Temperature
Color Wheel Speed
HSG Adjustment
Contrast Enhancement
Color Space
Save to User
Select
Optimize the projector for displaying images under certain conditions, such
as Bright, Presentation, Movie, sRGB, Blending, DICOM SIM., and User.
Set the wall color so that the projector can enhance the color performance
customized for the specific wall.
Adjust the intensity of the image.
Adjust the degree of difference between the lightest and darkest parts of
the picture and change the amount of black and white in the image.
Select the edge clarity of the image.
Adjust a video image from black and white to fully saturated color. The color
setting applies to video sources only.
Adjust the red-green color balance in the image of video images. The tint
setting applies to video sources only.
Select the appropriate gamma from Video, Film, Bright, CRT, and DICOM.
(Video source only) Increase the brightness of whites that are near 100%.
Change the intensity of the colors.
Higher speed will reduce the appearance of color artifacts seen by some
people.
Configure the color management settings. See "HSG Adjustment Menu" on
page 31.
30
—
Picture
Presentation
White
50
50
5
50
50
Video
50
Bright
3x
Off
Auto
Enter
Exit
Description
—
Advertisement
Table of Contents
