Picture Menu - Eiki EK-810U Owner's Manual

Hide thumbs Also See for EK-810U:
Table of Contents

Advertisement

DLP Projector — Owner's Manual

Picture Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press
the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
Item
Display Mode
Brightness
Contrast
Sharpness
Color
Tint
Phase
Frequency
Horz Position
Vert Position
3D Display
HSG Adjustment
Advanced
PICTURE
Display Mode
Brightness
Contrast
OUTPUT
Sharpness
Color
Tint
SETUP
Phase
Frequency
Horz Position
OPTION
Vert Position
Optimize the projector for displaying images under certain conditions, such
as Presentation, Video, Bright, Blending, 2D High Speed, 3D, and
user-definable preset.
Adjust the intensity of the image.
Adjust the degree of difference between the lightest and darkest parts of
the picture and change the amount of black and white in the image.
Select the edge clarity of the image.
Adjust a video image from black and white to fully saturated color. The color
setting applies to video sources only.
Adjust the red-green color balance in the image of video images. The tint
setting applies to video sources only.
Analog signals only. Adjust pixel phase when the image still shows shimmer
or noise after pixel tracking is optimized. Pixel phase can adjust the phase
of the pixel-sampling clock relative to the incoming signal.
Analog signals only. Steady flickering or several soft vertical stripes or
bands across the entire image indicates poor frequency. Proper frequency
ensures that the image quality is consistent across the screen, the aspect
ratio is maintained, and that the pixel phase can be optimized.
Move the image right or left within the area of available pixels.
Move the image up or down within the area of available pixels.
Configure the 3D display settings. See "3D Display Menu" on page 29.
Configure the color management settings. See "HSG Adjustment Menu" on
page 30.
Configure the advanced image settings. See "Advanced Menu" on page
31.
PICTURE
Description
28
Presentation
50
50
2
50
50
50
50
50
50

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ek-811w

Table of Contents